Videos DTM-1 (Driver Testing machine)

1.  DTM-1 Introduction with Production Testing

  You can view above video on YouTube at https://www.youtube.com/watch?v=hqOi4DI_iV8

This video contains most of the queries related to DTM-1 like:-

  1. How to understand display parameters of DTM-1.
  2. How to view only AC parameters.
  3. How to view only DC parameters.
  4. How to save data in DTM internal memory and Pen-drive also.
  5. How to connect load with DTM-1.
  6. How to test LED Driver or SMPS by DTM-1.
  7. What is PASS and FAIL status.
  8. How to know FAIL parameters if DTM-1 shows FAIL status.
  9. How to set Lower & Upper limits in DTM-1.
  10. What is Log ON Connect and How to use it.
  11. Which type of files are generated by DTM-1 in Pen-drive and what is the use of these files.

2.  DTM-1 Complete Setting Menu Description

You can view above video on YouTube at https://youtu.be/hKET2IHiyOM

This video contains most of the queries related to DTM-1 settings menu like:-

  1. How to understand display parameters of DTM-1.
  2. What is 2/16 Display Refresh page and How to set its time duration.
  3. What is 3/16 View Calibration page and How is it beneficial for users.
  4. What is 4/16 Application page and its different modes.
  5. What is Production mode and How to set it.
  6. What is R&D mode and How to set it.
  7. What is Data logging mode and How to set it.
  8. What is 5/16 Model Selection page and How to set & views its parameters.
  9. What is PASS & FAIL status and How to know its parameters.
  10. What is 6/16 Model View page and How to use it.
  11. What is 7/16 Buzzer Type page and How to use it.
  12. What is 8/16 Judgement Timer page and How to use it.
  13. What is 9/16 Log ON Connect page and How to use it.
  14. What is 10/16 Log ON Timing page and How to use it.
  15. What is 11/16 Log OFF Timing page and How to use it.
  16. What is THD (Total Harmonic Distortion) and How to overcome it.
  17. What is 12/16 Serial Number Increaments page and How to set it automatically increase or not.
  18. What is 13/16 Group Test page, How to set group test and Where it is use.
  19. What is 14/16 Data Log Period page and How to use Data log period.
  20. What is 15/16 LOC Fail Option page and How to set Fail parameters included or not in report sheet.
  21. What is 16/16 LOG THD Data ? page and How to set THD parameters included or not in report sheet.

3.  DTM-1 Introduction of Bar Code Scanner

  You can view above video on YouTube at https://youtu.be/vH17a_MZJRg

This video contains most of the queries related to DTM-1 like:-

  1. How to understand display parameters of DTM-1.
  2. How to view only AC parameters.
  3. How to view only DC parameters.
  4. How to test LED Driver or SMPS by DTM-1 using Bar Code scanner.
  5. What is PASS and FAIL status.
  6. What is Log ON Connect and How to use it.
  7. Which type of files are generated by DTM-1 in Pen-drive and what is the use of these files.

 

(Updated: December 10, 2018)